Magellan Paradox Instalační manuál stáhnout pdf (Strana 17)

Paradox Magellan Systems 17

24Hr. Gas Zones

Sections [001] to [016]: Zones 1 to 16, 3-digit # = 012

When a 24Hr. Gas zone opens, whether it is armed or

disarmed, the console will immediately generate an alarm.

The SIA FSK reporting format includes specific report codes

to identify the alarm as a Gas alarm.

24Hr. Heat Zones

Sections [001] to [016]: Zones 1 to 16, 3-digit # = 013

When a 24Hr. Heat zone opens, whether it is armed or

disarmed, the console will immediately generate an alarm.

The SIA FSK reporting format includes specific report codes

to identify the alarm as a Heat alarm.

24Hr. Water Zones

Sections [001] to [016]: Zones 1 to 16, 3-digit # = 014

When a 24Hr. Water zone opens, whether it is armed or

disarmed, the console will immediately generate an alarm.

The SIA FSK reporting format includes specific report codes

to identify the alarm as a Water alarm.

24Hr. Freeze Zones

Sections [001] to [016]: Zones 1 to 16, 3-digit # = 015

When a 24Hr. Freeze zone opens, whether it is armed or

disarmed, the console will immediately generate an alarm.

The SIA FSK reporting format includes specific report codes

to identify the alarm as a Freeze alarm.

Zone Options

Sections [001] to [016] represent zones 1 through 16

respectively as demonstrated in Figure 14 on page 15. After

entering the 3-digit Zone Definition (see Zone Definitions on

page 15), select one or more of the following Zone Options by

using the Feature Select Programming Method (see page 13):

Auto-zone Shutdown

Sections [001] to [016]: Zones 1 to 16; Option [1]

Option [1] OFF = Auto-zone Shutdown disabled

Option [1] ON = Auto-zone Shutdown enabled (default)

If, in a single armed period, the number of alarms generated

by a zone with the Auto Zone Shutdown option enabled

exceeds the number defined by the Auto Zone Shutdown

Counter, the console will no longer generate an alarm for

that zone. The Auto Zone Shutdown Counter resets every

time the system is armed.

Auto-zone Shutdown Counter

Section [067]: 001 to 015 alarms; 000 = Disabled;

Default = 5 alarms

Enter the desired limit into section [067] to program the

Auto-zone Shutdown Counter.

Bypass Option

Section [001] to [016]: Zones 1 to 16; Option [2]

Option [2] OFF = Bypass option disabled

Option [2] ON = Selected zone is bypass enabled (default)

When a user uses the Bypass Programming feature, only

zones with the Bypass option enabled can be programmed

as bypassed.

Fire zones cannot be programmed with the Bypass

option because the console will not bypass a Fire

zone.

Alarm Types

Sections [001] to [016]: Zones 1 to 16; Options [4] and [5]

When an alarm condition occurs, the console can be

programmed to react as shown in Table 2 on page 17.

Table 2: Alarm Type Options

The Alarm Type options cannot be programmed for

Fire zones. Fire zones are automatically programmed

with an audible pulsed alarm. This cannot be altered.

Intellizone

Sections [001] to [016]: Zones 1 to 16; option [6]

Option [6] OFF = Intellizone disabled (default)

Option [6] ON = Intellizone enabled

This feature reduces the possibility of false alarms. When a

zone with the Intellizone option opens, the console does not

immediately generate an alarm. First it triggers the

Intellizone Delay Timer. If any of the following conditions

occur during this period, the panel will generate an alarm:

• During the Intellizone Delay, a second zone has caused

an alarm.

• During the Intellizone Delay, the zone in alarm has

restored (closed) and re-occurred (opened).

• The zone in alarm is still open after the Intellizone Delay

has elapsed.

Options Description

[4] [5]

OFF OFF Audible steady alarm (default)

When the conditions for an alarm have been

met, the control panel can transmit the

appropriate Zone Alarm report code (see

page 26) and provides a steady output for the

on-board siren.

OFF ON Audible pulsed alarm

When the conditions for an alarm have been

met, Magellan can transmit the appropriate Zone

Alarm report code (see page 26) and provides a

pulsed output (see Figure 15 on page 16) for the

on-board siren.

ON OFF Silent alarm

When the conditions for an alarm are met, the

control panel can transmit the appropriate Zone

Alarm report code (see page 26) and will not

activate the control panel’s bell output. The

appropriate

ARM or STATUS LED on the keypads

will flash to indicate an alarm and the user will

still have to disarm the system.

ON ON Report only

When the conditions for an alarm have been

met, the control panel can transmit the

appropriate Zone Alarm report code (see

page 26). The system will not have to be

disarmed.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 44 45

Komentáře k této Příručce

Žádné komentáře

Magellan Paradox Instalační manuál Strana 17

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Magellan Paradox