Magellan MG-6060 Instalační manuál stáhnout pdf (Strana 30)

28 Reference & Installation Manual

4. Press [NEXT] until the desired telephone number appears,

then press [OK].

5. Enter the desired telephone number and then press [

OK]

twice.

6. Press [NEXT] until the desired report type appears, then

press [

OK] (see Report Types on page 28).

7. Press [NEXT] until the Record Alrm Mes? screen appears,

then press [OK].

8. Record the alarm message.

Report Types

There are four report types that can be used with Utility

Reporting.

• Disarm with user: The Magellan console calls the user

when specific users disarm the system.

• System troubles: The Magellan console calls the user

when specific troubles appear.

• Paramedic alarm: The Magellan console calls the user

when specific users require emergency assistance and

press the appropriate key on their remote controls.

• Zone activation: The Magellan console calls the user

when a specific zone is breached or opened.

Refer to the Magellan User Guide for more information

on using this feature.

Console Account Number

Section [107]

All report codes are preceded by a 4-digit or 3-digit Console

Account Number to ensure correct identification of the Magellan

console. The Console account number can be any hexa-digit

from 1 to F. To enter a 3-digit account number, simply press the

[1] key from the center keypad, followed by the 3-digit account

number. Also, when using 3-digit account numbers, you must

use 1-digit report codes.

Reporting Formats

Section [105] = Reporting format for MSTN 1

Section [106] = Reporting format for MSTN 2

The reporting formats apply only to the MSTNs (Monitoring

Station Telephone Numbers) programmed in sections [111] and

[112] (page 27)

The Magellan console can use a number of different reporting

formats and each monitoring station telephone number can be

programmed with a different reporting format. The three digits

entered into section [105] represent the reporting format used to

communicate with Monitoring Station Telephone Number 1 while

the three digits entered into section [106] represent the reporting

format used to communicate with Monitoring Station Telephone

Number 2.

Table 10: Reporting Formats

UL Note: The installer is required to verify the complete

compatibility of the DAC Receiver and formats at least

once per year.

Standard Pulse Formats

The Magellan console can use the Ademco slow, Silent Knight

and SESCOA standard pulse reporting formats (see Table 10 on

page 28).

Ademco Contact ID

Ademco Contact ID is a fast communicator format that uses tone

reporting instead of pulse reporting. This communicator format

also uses a pre-defined list of industry standard messages and

report codes that will suit most of your basic installation needs.

• To manually program the report codes, use the 2-digit

hexadecimal values from Appendix 2: Ademco Contact ID

Report Code List on page 37.

• Enter 00 to disable reporting or FF to use the default report

code from Appendix 1: Automatic Report Code List on page

35.

SIA FSK

SIA FSK is a fast communicator format that uses tone reporting

instead of pulse reporting. This communicator format uses a pre-

defined list of industry standard messages and report codes that

will suit most basic installation needs.

Please refer to Appendix 1: Automatic Report Code List on

page 35 for a complete list of the format’s pre-defined

industry standard messages and report codes.

Event Call Direction

Section [100]: Options [1] to [3]; Arming/Disarming

Option [1] ON = Call MSTN 1

Option [2] ON = Call MSTN 2

Option [3] ON = Call Pager telephone number

Section [100]: Options [5] to [7]; Alarm/Alarm Restore

Option [5] ON = Call MSTN 1

Option [6] ON = Call MSTN 2

Option [7] ON = Call Pager telephone number

Section [101]: Options [1] to [3]; Tamper/Tamper Restore

Option [1] ON = Call MSTN 1

Option [2] ON = Call MSTN 2

Option [3] ON = Call Pager telephone number

Section [101]: Options [5] to [7]; Trouble/Trouble Restore

Option [5] ON = Call MSTN 1

Option [6] ON = Call MSTN 2

Option [7] ON = Call Pager telephone number

3-digit Value Reporting Format

001 Ademco slow (1400Hz, 1900Hz, 10BPS)

002 Silent Knight Fast (1400Hz, 1900Hz, 10BPS)

003 SESCOA (2300Hz, 1800Hz, 20BPS)

004 Ademco Contact ID

005 SIA FSK

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 49 50

Komentáře k této Příručce

Žádné komentáře

Magellan MG-6060 Instalační manuál Strana 30

Komentáře k této Příručce

Související produkty a manuály pro Bezpečnostní systémy pro řízení přístupu Magellan MG-6060